<ospf3-interface>

Usage

<ospf3-interface-information>
    <ospf3-interface>
        <interface-name>interface-name</interface-name>
        <ospf-interface-state>ospf-interface-state</ospf-interface-state>
        <ospf-area>ospf-area</ospf-area>
        <dr-id>dr-id</dr-id>
        <bdr-id>bdr-id</bdr-id>
        <neighbor-count>neighbor-count</neighbor-count>
        <interface-address>interface-address</interface-address>
        <prefix-length>prefix-length</prefix-length>
        <ospf3-interface-index>ospf3-interface-index</ospf3-interface-index>
        <interface-type>interface-type</interface-type>
        <mtu>mtu</mtu>
        <interface-cost>interface-cost</interface-cost>
        <virtual-link-transit-area>virtual-link-transit-area
                                    </virtual-link-transit-area>
        <virtual-link-destination>virtual-link-destination</virtual-link-destination>
        <dr-address>dr-address</dr-address>
        <bdr-address>bdr-address</bdr-address>
        <adj-count>adj-count</adj-count>
        <router-priority>router-priority</router-priority>
        <interface-secondary/>
        <passive>passive</passive>
        <hello-interval>hello-interval</hello-interval>
        <poll-interval>poll-interval</poll-interval>
        <dead-interval>dead-interval</dead-interval>
        <retransmit-interval>retransmit-interval</retransmit-interval>
        <ospf-stub-type>ospf-stub-type</ospf-stub-type>
        <ipsec-sa>ipsec-sa</ipsec-sa>
        <igp-ldp-sync-holdtime>igp-ldp-sync-holdtime</igp-ldp-sync-holdtime>
        <igp-ldp-sync-state>igp-ldp-sync-state</igp-ldp-sync-state>
        <igp-ldp-sync-last-change>igp-ldp-sync-last-change</igp-ldp-sync-last-change>
        <igp-ldp-sync-reason>igp-ldp-sync-reason</igp-ldp-sync-reason>
        <igp-ldp-sync-timeleft>igp-ldp-sync-timeleft</igp-ldp-sync-timeleft>
        <interface-flood-list-count>interface-flood-list-count
                                    </interface-flood-list-count>
        <flood-list-count>flood-list-count</flood-list-count>
        <lsa-list>lsa-list</lsa-list>
        <interface-description-list>interface-description-list
                                    </interface-description-list>
    </ospf3-interface>
</ospf3-interface-information>

Description

No documentation is available yet.

Contents

<adj-count>—Count of fully adjacent neighbors.

<bdr-address>—IP address of BDR.

<bdr-id>—No documentation is available yet.

<dead-interval>—No documentation is available yet.

<dr-address>—IP address of DR.

<dr-id>—No documentation is available yet.

<flood-list-count>—No documentation is available yet.

<hello-interval>—Rate at which RSVP hellos are sent out. Default is 3 seconds.

<igp-ldp-sync-holdtime>—Length of time during which the maximum metric is advertised for an interface that is in the hold-down state because synchronization was lost between Label Distribution Protocol (LDP) and the interior gateway protocol (IGP).

<igp-ldp-sync-last-change>—Time since the state of synchronization between Label Distribution Protocol (LDP) and the interior gateway protocol (IGP) last changed.

<igp-ldp-sync-reason>—Reason for the change in the state of synchronization between Label Distribution Protocol (LDP) and the interior gateway protocol (IGP).

<igp-ldp-sync-state>—State of synchronization between Label Distribution Protocol (LDP) and the interior gateway protocol (IGP).

<igp-ldp-sync-timeleft>—Remaining amount of time the interface will remain in the hold-down state because synchronization was lost between Label Distribution Protocol (LDP) and the interior gateway protocol (IGP).

<interface-address>—No documentation is available yet.

<interface-cost>—Cost associated with this interface.

<interface-description-list>—No documentation is available yet.

<interface-flood-list-count>—No documentation is available yet.

<interface-name>—No documentation is available yet.

<interface-secondary>—OSPF interface is secondary.

<interface-type>—No documentation is available yet.

<ipsec-sa>—No documentation is available yet.

<lsa-list>—No documentation is available yet.

<mtu>—MTU along an interface.

<neighbor-count>—Number of neighbors on PIM interface.

<ospf-area>—Area ID.

<ospf-interface-state>—No documentation is available yet.

<ospf-stub-type>—Stub type of area.

<ospf3-interface-index>—No documentation is available yet.

<passive>—No documentation is available yet.

<poll-interval>—No documentation is available yet.

<prefix-length>—No documentation is available yet.

<retransmit-interval>—No documentation is available yet.

<router-priority>—Router priority used in DR election on broadcast or NBMA interface.

<virtual-link-destination>—Virtual link destination address.

<virtual-link-transit-area>—Virtual link transit area.