Tag Elements Beginning with P > <protocols> (configuration)

Usage

<configuration>
    <protocols>
        <l2iw>...</l2iw>
        <igmp>...</igmp>
        <mld>...</mld>
        <router-discovery>...</router-discovery>
        <router-advertisement>...</router-advertisement>
        <sap>...</sap>
        <rsvp>...</rsvp>
        <mpls>...</mpls>
        <bgp>...</bgp>
        <dvmrp>...</dvmrp>
        <isis>...</isis>
        <esis>...</esis>
        <msdp>...</msdp>
        <ospf>...</ospf>
        <ospf3>...</ospf3>
        <ldp>...</ldp>
        <pim>...</pim>
        <rip>...</rip>
        <ripng>...</ripng>
        <connections>...</connections>
        <vrrp>...</vrrp>
        <l2circuit>...</l2circuit>
        <link-management>...</link-management>
        <pgm>...</pgm>
        <bfd>...</bfd>
        <ilmi>...</ilmi>
        <lacp>...</lacp>
        <oam>...</oam>
        <ancp>...</ancp>
        <neighbor-discovery>...</neighbor-discovery>
        <igmp-host>...</igmp-host>
        <mld-host>...</mld-host>
        <l2-learning>...</l2-learning>
        <ppp>...</ppp>
        <layer2-control>...</layer2-control>
        <rstp>...</rstp>
        <mstp>...</mstp>
        <vstp>...</vstp>
        <dot1x>...</dot1x>
        <protection-group>...</protection-group>
    </protocols>
</configuration>

Description

Routing protocol configuration.

Contents

<ancp>—Access Node Control Protocol options.

<bfd>—Bidirectional Forwarding Detection (BFD) options.

<bgp>—BGP options.

<connections>—Circuit cross-connect configuration.

<dot1x>—802.1X options.

<dvmrp>—DVMRP options.

<esis>—End system-intermediate system options.

<igmp>—IGMP options.

<igmp-host>—IGMP host options.

<ilmi>—Interim Local Management Interface Protocol configuration.

<isis>—IS-IS options.

<l2-learning>—Layer 2 forwarding configuration.

<l2circuit>—Configuration for Layer 2 circuits over MPLS.

<l2iw>—Configuration for Layer 2 interworking.

<lacp>—Link Aggregation Control Protocol configuration.

<layer2-control>—Global options for layer 2 protocols.

<ldp>—LDP options.

<link-management>—LMP options.

<mld>—MLD options.

<mld-host>—MLD host options.

<mpls>—Multiprotocol Label Switching options.

<msdp>—MSDP configuration.

<mstp>—Multiple Spanning Tree Protocol options.

<neighbor-discovery>—No documentation is available yet.

<oam>—Operation, Administration, and Management configuration.

<ospf>—OSPF configuration.

<ospf3>—OSPFv3 configuration.

<pgm>—PGM options.

<pim>—PIM configuration.

<ppp>—Configure PPP process.

<protection-group>—Protection group.

<rip>—RIP options.

<ripng>—RIPng options.

<router-advertisement>—IPv6 router advertisement options.

<router-discovery>—ICMP router discovery options.

<rstp>—Rapid Spanning Tree Protocol options.

<rsvp>—RSVP options.

<sap>—Session Advertisement Protocol options.

<vrrp>—VRRP options.

<vstp>—VLAN Spanning Tree Protocol options.