Tag Elements Beginning with I > <interface> (configuration/protocols/ospf/area)

Usage

<configuration>
    <protocols>
        <ospf>
            <area>
                <interface>
                    <name>name</name> <!-- identifier -->
                    <disable/>
                    <interface-type>interface-type-choice</interface-type>
                    <passive>...</passive>
                    <secondary/>
                    <metric>metric</metric>
                    <te-metric>te-metric</te-metric>
                    <priority>priority</priority>
                    <ldp-synchronization>...</ldp-synchronization>
                    <retransmit-interval>retransmit-interval</retransmit-interval>
                    <transit-delay>transit-delay</transit-delay>
                    <hello-interval>hello-interval</hello-interval>
                    <dead-interval>dead-interval</dead-interval>
                    <authentication>...</authentication>
                    <demand-circuit/>
                    <no-neighbor-down-notification/>
                    <ipsec-sa>ipsec-sa</ipsec-sa>
                    <topology>...</topology>
                    <bfd-liveness-detection>...</bfd-liveness-detection>
                    <dynamic-neighbors/>
                    <neighbor>...</neighbor>
                    <poll-interval>poll-interval</poll-interval>
                </interface>
            </area>
        </ospf>
    </protocols>
</configuration>

Description

Include an interface in this area.

Contents

<authentication>—No documentation is available yet.

<bfd-liveness-detection>—Bidirectional Forwarding Detection options.

<dead-interval>—Dead interval (seconds).

<demand-circuit>—Interface functions as a demand circuit.

<disable>—Disable OSPF on this interface.

<dynamic-neighbors>—Learn neighbors dynamically on a p2mp interface.

<hello-interval>—Hello interval (seconds).

<interface-type>—Type of interface.

• nbma—Nonbroadcast multiaccess.
• p2mp—Point-to-multipoint NBMA.
• p2p—Point-to-point.

<ipsec-sa>—IPSec security association name.

<ldp-synchronization>—Advertise maximum metric until LDP is operational.

<metric>—Interface metric.

<name>—Interface name.

<neighbor>—NBMA neighbor.

<no-neighbor-down-notification>—Don't inform other protocols about neighbor down events.

<passive>—Do not run OSPF, but advertise it.

<poll-interval>—Poll interval for NBMA interfaces.

<priority>—Designated router priority.

<retransmit-interval>—Retransmission interval (seconds).

<secondary>—Treat interface as secondary.

<te-metric>—Traffic engineering metric.

<topology>—Topology specific attributes.

<transit-delay>—Transit delay (seconds).