Tag Elements Beginning with I > <interface> (configuration/dynamic-profiles/interfaces)

Usage

<configuration>
    <dynamic-profiles>
        <interfaces>
            <interface>
                <name>name</name> <!-- identifier -->
                <description>description</description>
                <disable/>
                <fabric-options>...</fabric-options>
                <traceoptions>...</traceoptions>
                <passive-monitor-mode/>
                <keepalives>...</keepalives>
                <no-keepalives/>
                <traps/>
                <accounting-profile>accounting-profile</accounting-profile>
                <per-unit-scheduler/>
                <shared-scheduler/>
                <hierarchical-scheduler/>
                <schedulers>schedulers</schedulers>
                <dce/>
                <vlan-tagging/>
                <stacked-vlan-tagging/>
                <flexible-vlan-tagging/>
                <vlan-vci-tagging/>
                <native-vlan-id>native-vlan-id</native-vlan-id>
                <speed>speed-choice</speed>
                <mtu>mtu</mtu>
                <hold-time>...</hold-time>
                <satop-options>...</satop-options>
                <clocking>...</clocking>
                <link-mode>link-mode-choice</link-mode>
                <encapsulation>encapsulation-choice</encapsulation>
                <framing>...</framing>
                <unidirectional/>
                <lmi>...</lmi>
                <mlfr-uni-nni-bundle-options>...</mlfr-uni-nni-bundle-options>
                <mac>mac</mac>
                <receive-bucket>...</receive-bucket>
                <transmit-bucket>...</transmit-bucket>
                <shared-interface/>
                <sonet-options>...</sonet-options>
                <aggregated-sonet-options>...</aggregated-sonet-options>
                <atm-options>...</atm-options>
                <multiservice-options>...</multiservice-options>
                <ggsn-options>...</ggsn-options>
                <ppp-options>...</ppp-options>
                <redundancy-options>...</redundancy-options>
                <lsq-failure-options>...</lsq-failure-options>
                <services-options>...</services-options>
                <t3-options>...</t3-options>
                <e3-options>...</e3-options>
                <e1-options>...</e1-options>
                <t1-options>...</t1-options>
                <ds0-options>...</ds0-options>
                <serial-options>...</serial-options>
                <gratuitous-arp-reply/>
                <no-gratuitous-arp-request/>
                <ether-options>...</ether-options>
                <gigether-options>...</gigether-options>
                <optics-options>...</optics-options>
                <otn-options>...</otn-options>
                <fastether-options>...</fastether-options>
                <redundant-ether-options>...</redundant-ether-options>
                <aggregated-ether-options>...</aggregated-ether-options>
                <es-options>...</es-options>
                <dsl-options>...</dsl-options>
                <shdsl-options>...</shdsl-options>
                <data-input>...</data-input>
                <switch-options>...</switch-options>
                <container-options>...</container-options>
                <unit>...</unit>
                <no-partition>...</no-partition>
                <partition>...</partition>
                <test-clocking>test-clocking</test-clocking>
                <eaid-test-attr>eaid-test-attr</eaid-test-attr>
                <eaid-default-test-attr>eaid-default-test-attr</eaid-default-test-attr>
                <ia-test-so-only>ia-test-so-only</ia-test-so-only>
                <ia-test-not-so-only>ia-test-not-so-only</ia-test-not-so-only>
                <ia-test-ge-fe-only>ia-test-ge-fe-only</ia-test-ge-fe-only>
                <ia-test-t3-channelized-only>ia-test-t3-channelized-only
                                    </ia-test-t3-channelized-only>
                <ia-test-sonnet-options>ia-test-sonnet-options</ia-test-sonnet-options>
                <ia-test-not-fe-ge>ia-test-not-fe-ge</ia-test-not-fe-ge>
            </interface>
        </interfaces>
    </dynamic-profiles>
</configuration>

Description

No documentation is available yet.

Contents

<accounting-profile>—Accounting profile name.

<aggregated-ether-options>—Aggregated Ethernet interface-specific options.

<aggregated-sonet-options>—Aggregated SONET interface-specific options.

<atm-options>—ATM interface-specific options.

<clocking>—Interface clock source.

<container-options>—Container interface specific options.

<data-input>—Configuration for drop-insert data input.

<dce>—Respond to Frame Relay status enquiry messages.

<description>—Text description of interface.

<disable>—Disable this interface.

<ds0-options>—DS-0 interface-specific options.

<dsl-options>—DSL interface-specific options.

<e1-options>—E1 interface-specific options.

<e3-options>—E3 interface-specific options.

<eaid-default-test-attr>—No documentation is available yet.

<eaid-test-attr>—No documentation is available yet.

<encapsulation>—Physical link-layer encapsulation.

• atm-ccc-cell-relay—ATM cell relay encapsulation for cross-connect.
• atm-pvc—ATM permanent virtual circuits.
• cisco-hdlc—Cisco-compatible HDLC framing.
• cisco-hdlc-ccc—Cisco-compatible HDLC framing for a cross-connect.
• cisco-hdlc-tcc—Cisco-compatible HDLC framing for a translational cross-connect.
• ether-vpls-ppp—Ethernet VPLS over PPP (bridging) device.
• ethernet-bridge—Ethernet layer-2 bridging.
• ethernet-ccc—Ethernet cross-connect.
• ethernet-over-atm—Ethernet over ATM encapsulation.
• ethernet-tcc—Ethernet translational cross-connect.
• ethernet-vpls—Ethernet virtual private LAN service.
• extended-frame-relay-ccc—Any Frame Relay DLCI for cross-connect.
• extended-frame-relay-ether-type-tcc—Cisco-compatible Frame Relay encapsulation any DLCI for translational cross-connect.
• extended-frame-relay-tcc—Any Frame Relay DLCI for translational cross-connect.
• extended-vlan-bridge—VLAN layer-2 bridging.
• extended-vlan-ccc—Nonstandard TPID tagging for a cross-connect.
• extended-vlan-tcc—802.1q tagging for a translational cross-connect.
• extended-vlan-vpls—Extended VLAN virtual private LAN service.
• flexible-ethernet-services—Allows per-unit Ethernet encapsulation configuration.
• flexible-frame-relay—Multiple Frame Relay encapsulations.
• frame-relay—Frame Relay encapsulation.
• frame-relay-ccc—Frame Relay for cross-connect.
• frame-relay-ether-type—Cisco-compatible Frame Relay encapsulation.
• frame-relay-ether-type-tcc—Cisco-compatible Frame Relay encapsulation for translational cross-connect.
• frame-relay-port-ccc—Frame Relay port encapsulation for a cross-connect.
• frame-relay-tcc—Frame Relay for translational cross-connect.
• multilink-frame-relay-uni-nni—Multilink Frame Relay UNI NNI (FRF.16) encapsulation.
• multilink-ppp—Multilink PPP.
• ppp—Serial PPP device.
• ppp-ccc—Serial PPP device for a cross-connect.
• ppp-tcc—Serial PPP device for a translational cross-connect.
• satop—Structure-Agnostic TDM over Packet encapsulation.
• vlan-ccc—802.1q tagging for a cross-connect.
• vlan-vci-ccc—CCC for VLAN Q-in-Q and ATM VPI/VCI interworking.
• vlan-vpls—VLAN virtual private LAN service.

<es-options>—ES PIC interface-specific options.

<ether-options>—Ethernet interface-specific options.

<fabric-options>—Fabric interface specific options.

<fastether-options>—Fast Ethernet interface-specific options.

<flexible-vlan-tagging>—Support for no tagging, or single and double 802.1q VLAN tagging.

<framing>—Frame type.

<ggsn-options>—GGSN interface-specific options.

<gigether-options>—Gigabit Ethernet interface-specific options.

<gratuitous-arp-reply>—Enable gratuitous ARP reply.

<hierarchical-scheduler>—Enable hierarchical scheduling.

<hold-time>—Hold time for link up and link down.

<ia-test-ge-fe-only>—No documentation is available yet.

<ia-test-not-fe-ge>—No documentation is available yet.

<ia-test-not-so-only>—No documentation is available yet.

<ia-test-so-only>—No documentation is available yet.

<ia-test-sonnet-options>—No documentation is available yet.

<ia-test-t3-channelized-only>—No documentation is available yet.

<keepalives>—Send or demand keepalive messages.

<link-mode>—Link operational mode.

• full-duplex—Full-duplex operation.
• half-duplex—Half-duplex operation.

<lmi>—Local Management Interface settings.

<lsq-failure-options>—Link services queuing failure options.

<mac>—Hardware MAC address.

<mlfr-uni-nni-bundle-options>—Multilink Frame Relay UNI NNI (FRF.16) management settings.

<mtu>—Maximum transmit packet size.

<multiservice-options>—Multiservice interface-specific options.

<name>—No documentation is available yet.

• $junos-interface-ifd-name—Dynamic profile interface.
• interface-name—Interface name.

<native-vlan-id>—Virtual LAN identifier for untagged frames.

<no-gratuitous-arp-request>—Ignore gratuitous ARP request.

<no-keepalives>—Do not send or demand keepalive messages.

<no-partition>—Use channelizable interface as clear channel.

<optics-options>—Optics options.

<otn-options>—Optical Transmission Network interface-specific options.

<partition>—Channelized interface partition.

<passive-monitor-mode>—Use interface to tap packets from another router.

<per-unit-scheduler>—Enable subunit queuing on Frame Relay or VLAN IQ interface.

<ppp-options>—Point-to-Point Protocol (PPP) interface-specific options.

<receive-bucket>—Set receive bucket parameters.

<redundancy-options>—Redundancy options.

<redundant-ether-options>—Ethernet redundancy options.

<satop-options>—Structure-Agnostic TDM over Packet protocol options.

<schedulers>—Number of schedulers to allocate for interface.

<serial-options>—Serial interface-specific options.

<services-options>—Services interface-specific options.

<shared-interface>—Enable shared interface on the interface.

<shared-scheduler>—Enabled shared queuing on an IQ2 interface.

<shdsl-options>—SHDSL interface-specific options.

<sonet-options>—SONET interface-specific options.

<speed>—Link speed.

• 100m—No documentation is available yet.
• 10m—No documentation is available yet.
• 1g—No documentation is available yet.
• oc12—No documentation is available yet.
• oc3—No documentation is available yet.
• oc48—No documentation is available yet.

<stacked-vlan-tagging>—Stacked 802.1q VLAN tagging support.

<switch-options>—Front end ports configuration.

<t1-options>—T1 interface-specific options.

<t3-options>—T3 interface-specific options.

<test-clocking>—DDL-Test Interface clock source.

<traceoptions>—Interface trace options.

<transmit-bucket>—Set transmit bucket parameters.

<traps>—Enable SNMP notifications on state changes.

<unidirectional>—Unidirectional Mode.

<unit>—Logical interface.

<vlan-tagging>—802.1q VLAN tagging support.

<vlan-vci-tagging>—CCC for VLAN Q-in-Q and ATM VPI/VCI interworking.