Tag Elements Beginning with E > <e1-options> (configuration/interfaces/interface)

Usage

<configuration>
    <interfaces>
        <interface>
            <e1-options>
                <timeslots>timeslots</timeslots>
                <loopback>loopback-choice</loopback>
                <framing>framing-choice</framing>
                <fcs>fcs-choice</fcs>
                <invert-data/>
                <idle-cycle-flag>idle-cycle-flag-choice</idle-cycle-flag>
                <start-end-flag>start-end-flag-choice</start-end-flag>
                <bert-algorithm>bert-algorithm-choice</bert-algorithm>
                <bert-error-rate>bert-error-rate</bert-error-rate>
                <bert-period>seconds</bert-period>
            </e1-options>
        </interface>
    </interfaces>
</configuration>

Description

E1 interface-specific options.

Contents

<bert-algorithm>—Set BERT algorithm.

• all-ones-repeating—Repeating one bits.
• all-zeros-repeating—Repeating zero bits.
• alternating-double-ones-zeros—Alternating pairs of ones and zeros.
• alternating-ones-zeros—Alternating ones and zeros.
• pseudo-2e10—Pattern is 2^10 - 1.
• pseudo-2e11-o152—Pattern is 2^11 -1 (per O.152 standard).
• pseudo-2e15-o151—Pattern is 2^15 - 1 (per O.151 standard).
• pseudo-2e17—Pattern is 2^17 - 1.
• pseudo-2e18—Pattern is 2^18 - 1.
• pseudo-2e20-o151—Pattern is 2^20 - 1 (per O.151 standard).
• pseudo-2e20-o153—Pattern is 2^20 - 1 (per O.153 standard).
• pseudo-2e21—Pattern is 2^21 - 1.
• pseudo-2e22—Pattern is 2^22 - 1.
• pseudo-2e23-o151—Pattern is 2^23 (per O.151 standard).
• pseudo-2e25—Pattern is 2^25 - 1.
• pseudo-2e28—Pattern is 2^28 - 1.
• pseudo-2e29—Pattern is 2^29 - 1.
• pseudo-2e3—Pattern is 2^3 - 1.
• pseudo-2e31—Pattern is 2^31 - 1.
• pseudo-2e32—Pattern is 2^32 - 1.
• pseudo-2e4—Pattern is 2^4 - 1.
• pseudo-2e5—Pattern is 2^5 - 1.
• pseudo-2e6—Pattern is 2^6 - 1.
• pseudo-2e7—Pattern is 2^7 - 1.
• pseudo-2e9-o153—Pattern is 2^9 - 1 (per O.153 standard).
• repeating-1-in-4—1 bit in 4 is set.
• repeating-1-in-8—1 bit in 8 is set.
• repeating-3-in-24—3 bits in 24 are set.

<bert-error-rate>—Bit error rate (10^-n for n > 0, and zero for n = 0).

<bert-period>—Length of BERT test.

<fcs>—Frame checksum.

• 16—16-bit mode.
• 32—32-bit mode.

<framing>—Framing mode.

• g704—G704 mode with CRC4.
• g704-no-crc4—G704 mode without CRC4.
• unframed—Unframed mode.

<idle-cycle-flag>—Value to transmit in idle cycles.

• flags—Transmit 0x7E in idle cycles.
• ones—Transmit 0xFF (all ones) in idle cycles.

<invert-data>—Invert data.

<loopback>—Loopback mode.

• local—Local loopback.
• remote—Remote loopback.

<start-end-flag>—Set start/end flags on transmission.

• filler—Send two idle cycles between start/end flags.
• shared—Share start/end flags on transmit.

<timeslots>—Timeslots (1..32); for example, 1-4,6,9-11,32 (no space).