Tag Elements Beginning with C > <chassis> (configuration)

Usage

<configuration>
    <chassis>
        <craft-lockout/>
        <config-button>...</config-button>
        <packet-scheduling/>
        <vrf-mtu-check/>
        <redundancy>...</redundancy>
        <routing-engine>...</routing-engine>
        <aggregated-devices>...</aggregated-devices>
        <container-devices>...</container-devices>
        <fpc>...</fpc>
        <disable-power-management/>
        <fpc-feb-connectivity>...</fpc-feb-connectivity>
        <ioc-npc-connectivity>...</ioc-npc-connectivity>
        <pem>...</pem>
        <sib>...</sib>
        <sfm>...</sfm>
        <alarm>...</alarm>
        <network-services>network-services-choice</network-services>
        <lcc>...</lcc>
        <fabric>...</fabric>
        <synchronization>...</synchronization>
        <lcd>...</lcd>
        <system-domains>...</system-domains>
    </chassis>
</configuration>

Description

Chassis configuration.

Contents

<aggregated-devices>—Aggregated devices configuration.

<alarm>—Global alarm settings.

<config-button>—Config button behavior settings.

<container-devices>—Container devices configuration.

<craft-lockout>—Disable craft interface input.

<disable-power-management>—Disable Power Management in this chassis.

<fabric>—Switch fabric settings.

<fpc>—Flexible PIC Concentrator parameters.

<fpc-feb-connectivity>—Connectivity between Flexible PIC Concentrators and Forwarding Engine Boards.

<ioc-npc-connectivity>—Connectivity between IOC and NPC.

<lcc>—Line-card chassis configuration.

<lcd>—Chassis LCD.

<network-services>—Chassis network services configuration.

• ethernet—Ethernet network services.
• ip—IP network services.

<packet-scheduling>—Enable DX2.0 packet scheduling.

<pem>—Power supply (PEM) parameters.

<redundancy>—Redundancy settings.

<routing-engine>—Routing Engine settings.

<sfm>—Switching and Forwarding Module parameters.

<sib>—Switch Interface Board parameters.

<synchronization>—Clock synchronization options.

<system-domains>—Root and protected system domain configuration.

<vrf-mtu-check>—Enable Internet Processor II-based MTU check.