Tag Elements Beginning with A > <aps> (configuration/interfaces/interface/container-options/
container-type)

Usage

<configuration>
    <interfaces>
        <interface>
            <container-options>
                <container-type>
                    <aps>
                        <working-circuit>working-circuit</working-circuit>
                        <protect-circuit>protect-circuit</protect-circuit>
                        <annex-b/>
                        <wait-to-restore-time>seconds</wait-to-restore-time>
                        <preserve-interface/>
                        <neighbor>neighbor</neighbor>
                        <paired-group>paired-group</paired-group>
                        <authentication-key>...</authentication-key>
                        <switching-mode>switching-mode-choice</switching-mode>
                        <advertise-interval>milliseconds</advertise-interval>
                        <hold-time>milliseconds</hold-time>
                        <revert-time>seconds</revert-time>
                        <break-before-make/>
                        <request>request-choice</request>
                        <force>force-choice</force>
                        <lockout/>
                    </aps>
                </container-type>
            </container-options>
        </interface>
    </interfaces>
</configuration>

Description

APS options on the container.

Contents

<advertise-interval>—Advertise interval.

<annex-b>—Annex-b mode.

<authentication-key>—Authentication parameters.

<break-before-make>—Ensure only one interface is active at a time.

<force>—Force circuit state.

• protect—Force protect circuit.
• working—Force working circuit.

<hold-time>—Hold time.

<lockout>—Lockout protection.

<neighbor>—Neighbor address.

<paired-group>—Name of paired APS group.

<preserve-interface>—Preserve interface state for fast failover.

<protect-circuit>—Protect circuit group name.

<request>—Request circuit state.

• protect—Request protect circuit.
• working—Request working circuit.

<revert-time>—Circuit revert time.

<switching-mode>—APS switching mode.

• bidirectional—Bidirectional.
• unidirectional—Unidirectional.

<wait-to-restore-time>—Circuit wait-to-restore time for annex-b.

<working-circuit>—Working circuit group name.