Verifying SIP Call Detail

Purpose

Display address and Session Description Protocol (SDP) about active calls.

Action

From the J-Web interface, select Monitor> ALGs > SIP > Calls. Alternatively, from the CLI, enter the show security alg sip calls detail command.

Total number of calls: 1
       Call ID    : 000ed748-5533005e-11d97de9-77759865@10.10.10.254
       Local tag  : 000f90542e7e005c7807c3a0-0647d41e
       Remote tag : 000ed748553300724648b313-2ccd0d9a
       State      : STATE_ESTABLISHED                RM Group:2048
                     Local Info               Remote Info            RM Info
                     ----------               -----------            -------
       Call leg 1:   IP             Port      IP             Port      RSC id    
         Host        10.10.10.10    5060      10.10.10.10    5060 
         Contact     10.10.10.100   5060      10.10.10.254   1025      8191 
         Contact maddr-                        -                   
         SDP:c       10.10.10.100             10.10.10.254        
         SDP:m       10.10.10.100   18902     10.10.10.254   64518 8192 ,8185 
       Call leg 2:
         Host        10.10.10.10    5060      10.10.10.10    5060 
         Contact     10.10.10.254   1025      10.10.10.100   5060      8188 
         Contact maddr-                        -                   
         SDP:c       10.10.10.254             10.10.10.100        
         SDP:m       10.10.10.254   64518     10.10.10.100   18902 8186 ,8187 

What it Means

The output provides detail about all active SIP calls. Verify the following information:

• The total number of calls, their ID and tag information, and state
• Remote group ID
• The IP addresses and port numbers for each call leg, and Session Description Protocol (SDP) connection and media details

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.