[Contents] [Prev] [Next] [Index] [Report an Error]

Verifying MGCP Endpoints

Purpose

Display information about MGCP endpoints.

Action

From the J-Web interface, select Monitor>ALGs > MGCP > Endpoints. Alternatively, from the CLI, enter the show security alg mgcp endpoints command.

user@host> show security alg mgcp endpoints

Gateway: 101.50.10.1 Zone: Trust IP: 101.50.10.1 -> 101.50.10.1
   Endpoint             Trans #  Call #   Notified Entity     
   d001                 1        1        0.0.0.0/0->0.0.0.0/0
Gateway: 3.3.3.5 Zone: Untrust IP: 3.3.3.5 -> 3.3.3.5
   Endpoint             Trans #  Call #   Notified Entity     
   d001                 1        1        0.0.0.0/0->0.0.0.0/0

What it Means

The output displays information about all MGCP endpoints. Verify the following information:

Gateway IP address and zone of both endpoints
Endpoint identifier, Trans #, Call #, and notified entity for each gateway

[Contents] [Prev] [Next] [Index] [Report an Error]