J-Web Configuration

To associate a policy to a scheduler using the J-Web configuration editor:

Select Configuration>View and Edit>Edit Configuration.
The Configuration page appears.
From the list of configured policies, click the policy you need to associate with a scheduler.
Under the Nested Configuration column, click Policy.
Under the Actions column, click Edit.
To specify the name of the schedule you wish to associate with the policy, in the Scheduler name box, type SatHrs and click OK.

To set schedulers that allow associated policies to check for packet matches from noon to 6 PM on Saturdays and Sundays:

Select Configuration>View and Edit>Edit Configuration.
The Configuration page appears.
In the Scheduler name box, type scheduler SatHrs.
Next to Saturday, click Configure.
From the Daily type list, select Start time.
Next to Start time, click Add new entry.
In the Start time box, type 12:00:00.
In the Stop time box, type 18:00:00 and click OK.
To set the scheduler that allow associated policies to check for packet matches from noon to 6 PM on Sundays, repeat Step 1 through Step 7.

To bind these schedules to the policy, allowing access during the specified weekend hours:

Select Configuration > View and Edit > Edit Configuration.
The Configuration page appears.
Next to Security, click Configure or Edit.
Next to Policies, select the check box and click Configure.
In the From zone name box, type green.
In the To zone name box, type red.
In the Policy name box, type abc.
In the Scheduler name box, type SatHrs and click OK.
In the Scheduler name box, type SunHrs and click OK.
If you are finished configuring the device, commit the configuration.
You can verify the schedules using the show schedulers CLI command. See Verifying Scheduled Policies.