J-Web Configuration

To configure screen and assign an Internet Protocol (IP) to it:

1. Select Configuration > View and Edit > Edit Configuration. The Configuration page appears.
2. Next to Security, click Configure or Edit.
3. Next to Screen, click Configure.
4. Next to Ids option, click Add new entry.
5. In the Name box, type ip-record-route.
6. Next to Ip, click Configure.
7. Next to Record route option, select the check box and click OK.
8. Next to Ids option, click Add new entry.
9. In the Name box, type ip-timestamp-opt.
10. Next to Ip, click Edit.
11. Next to Timestamp option, select the check box and click OK.
12. Next to Ids option, click Add new entry.
13. In the Name box, type ip-security-opt.
14. Next to Ip, click Edit.
15. Next to Security option, select the check box and click OK.
16. In the Name box, type ip-stream-opt.
17. Next to Ip, click Edit.
18. Next to Stream option, select the check box and click OK.
19. To save and commit the configuration, click Commit.

To configure zones:

1. Select Configuration > View and Edit > Edit Configuration. The Configuration page appears.
2. Next to Security, click Configure or Edit.
3. Next to Zones, click Configure.
4. Next to Security zone, click Add new entry.
5. In the Name box, type zone.
6. In the Screen box, type ip-record-route-opt and click OK.
7. Next to Security zone, click Add new entry.
8. In the Name box, type zone.
9. In the Screen box, type ip-timestamp-opt and click OK.
10. Next to Security zone, click Add new entry.
11. In the Name box, type zone.
12. In the Screen box, type ip-security-opt and click OK.
13. Next to Security zone, click Add new entry.
14. In the Name box, type zone.
15. In the Screen box, type ip-stream-opt and click OK.
16. To save and commit the configuration, click Commit.

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.