J-Web Configuration

To configure a zone using the J-Web configuration editor:

1. Select Configuration>View and Edit>Edit Configuration.

   The Configuration page appears.

2. Next to Security, click Configure or Edit.
3. Next to Zones, click Configure or Edit.
4. Next to Security zone, click Add new entry.
5. In the Name box, type ABC and click OK.

To configure an interface and assign it to the created security zone:

1. Corresponding to the security zone name ABC zone, click Edit.
2. Next to Interfaces, click Add new entry.
3. In the Interface unit box, type ge-0/0/1 and click OK.
4. Next to Unit, click Add new entry.
5. In the Interface unit number box, type 1.
6. Under Family, select Inet and click OK.
7. Next to Address book, click Configure or Edit.
8. Next to Address, click Add new entry.
9. In the Address name box, type 10.12.12.1/24 and click OK.
10. If you are finished configuring the device, commit the configuration.

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.