[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Example: Configuring Static NAT on SRX-series Services Gateways
JUNOS software allows you to define static NAT rules to perform
one-to-one static mapping from one IP address or subnet to another
IP address or subnet without port address translation.
|
Before You Begin
|
|
For background information, read:
|
In this example, you perform the following tasks:
- Define a static NAT rule for traffic from zone red to address 20.1.1.100. Translate the destination IP to 10.0.0.200 and routing-instance ri-green.
- Define a static NAT rule for traffic from zone red to address 20.1.1.101. Translate the destination IP to 10.0.1.200 and routing-instance ri-blue.
- Define a static NAT rule for traffic from interface ge-0/0/0.0 to address 30.1.1.3. Translate the destination IP to 10.0.2.200.
- Define a static NAT rule for traffic from routing-instance ri-red to address subnet 30.1.1.0/24. Translate the destination address subnet to 172.16.0.0/24.
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
