[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Example: Configuring Destination NAT on SRX-series Services
Gateways
JUNOS software allows you to define NAT rules to translate the
destination address from one IP address to another.
In this example, you perform the following tasks:
- Define a destination NAT rule for traffic from routing-instance ri-1 to address 1.1.1.1.
Translate the destination IP address to 2.2.2.10.
- Define a destination NAT rule for traffic from zone Z2 to address 1.1.1.1. Translate
the destination IP address to 2.2.2.20.
- Define a destination NAT rule for traffic from interface fe-0/0/0.0 to address 1.1.1.1. Translate the destination IP address to 2.2.2.30.
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
