[Contents] [Prev] [Next] [Index] [Report an Error]

Configuring the PC or Laptop

Before You Begin

Configure a firewall on the J-series router you are creating a tunnel to. See Configuring the Firewall on the Router.

You can use a preshared key operation when the NetScreen-Remote client has either a fixed or dynamically assigned IP address. There are three steps to setting up a NetScreen-Remote client for a VPN tunnel with a preshared key:

  1.  Creating a New Connection
  2.  Creating the Preshared Key
  3.  Defining the IPsec Protocols
[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.