Configuring Addresses and Address Sets—Quick Configuration

You can use J-Web Quick Configuration to quickly configure address books and address sets.

Before You Begin
For background information, read Understanding Security Zones and Configuring Address Books. Configure zones. For more information, see Configuring Security Zones—Quick Configuration.

To configure addresses and address sets with Quick Configuration:

Select Configuration > Quick Configuration > Policy Elements > Address Books.
Select the zone for which you want to configure address books. For more information on creating zones, see Creating Security Zones.
Click Add to add IP addresses to the address book. See Figure 137.
Figure 137: Quick Configuration Policy Elements Page for Address Books
Specify an address name.
Specify either an IP address or a DNS name. The IP address must be an IPv4 address with the number of prefix bits. You can use domain names only if the system is configured to use DNS services.
Click one of the following buttons:
- To apply the configuration and stay on the Quick Configuration page, click Apply.
- To apply the configuration and return to the main Configuration page, click OK.
- To cancel your entries and return to the main page, click Cancel.
Continue adding addresses using Step 2 through Step 5. Once you have the addresses you need to create an address set, select the Address Sets tab.
Click Add. See Figure 138.
Figure 138: Configuring Address Sets
Specify an Address Set name.
To add the predefined addresses in the “ Addresses in this set” column, use the left and right arrows.
Click OK to save the configuration and return to the main Configuration page.