[Contents] [Prev] [Next] [Index] [Report an Error]

CLI Configuration

Use the following commands to bind redundant child physical interfaces to reth1:



{primary:node1}
user@host# set interfaces ge-0/0/0 gigether-options
redundant-parent reth1

{primary:node1}
user@host# set interfaces ge-7/0/0 gigether-options
redundant-parent reth1

{primary:node1}
user@host# set interfaces fe-1/0/0 fast-ether-options
redundant-parent reth1

{primary:node1}
user@host# set interfaces fe-8/0/0 fast-ether-options
redundant-parent reth1

Use the following commands to:

Add reth 1 to redundancy group 1.
Set the MTU size to 1500 bytes.
Assign IP address 10.1.1.3/24 to reth1. {primary:node1} user@host# set interfaces reth1 redundant-ether-options redundancy-group 1 {primary:node1} user@host# set interfaces reth1 unit 0 family inet mtu 1500 {primary:node1} user@host# set interfaces reth1 unit 0 family inet address 10.1.1.3/24

Use the following command to associate reth1.0 with a security zone named Trust. Security zone configuration is the same for redundant Ethernet interfaces as for any other interface.



{primary:node1}
user@host# set security zones security-zone
Trust interfaces reth1.0

[Contents] [Prev] [Next] [Index] [Report an Error]