CLI Configuration

To configure failover processing:

1. Specify how often (in seconds) the JUNOS Enforcer should expect a heartbeat signal from the Infranet Controller indicating an active connection:

   edit services unified-access-control interval seconds

2. Specify the interval (in seconds) at which the JUNOS Enforcer should consider the current connection timed out:

   edit services unified-access-control timeout seconds

3. Specify how the JUNOS Enforcer should handle all current and subsequent traffic sessions when its connection to an Infranet Controller cluster times out:

   edit services unified-access-control timeout-action (close | no-change | open)

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.