[Contents] [Prev] [Next] [Index] [Report an Error]

CLI Configuration

user@host# set security policies from-zone RED to-zone GREEN policy allowIn match source-address netTopLoopInt
user@host# set security policies from-zone RED to-zone GREEN policy allowIn match destination-address netBottomLoopInt
user@host# set security policies from-zone RED to-zone GREEN policy allowIn match application any
user@host# set security policies from-zone RED to-zone GREEN policy allowIn then permit

If you are finished configuring the device, commit the configuration.

To check the configuration, see Verifying Policy Configuration.

[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.