[Contents] [Prev] [Next] [Index] [Report an Error]

Verifying the PPPoE Version

Purpose

Verify the version information of the PPPoE protocol configured on the device interfaces.

Action

From the CLI, enter the show pppoe version command.

Sample Output

user@host> show pppoe version

Point-to-Point Protocol Over Ethernet, version 1. rfc2516
   PPPoE protocol               = Enabled
   Maximum Sessions             = 256
   PADI resend timeout          = 2 seconds
   PADR resend timeout          = 16 seconds
   Max resend timeout           = 64 seconds
   Max Configured AC timeout    = 4 seconds

Meaning

The output shows PPPoE protocol information. Verify the following information:

The correct version of the PPPoE protocol is configured on the interface.
Under PPPoE protocol, the PPPoE protocol is enabled.

Related Topics

For a complete description of show pppoe version output, see the JUNOS Interfaces Command Reference.

[Contents] [Prev] [Next] [Index] [Report an Error]