 |
Note: Ports on uPIMs and ePIMs must be in routing mode before you can configure the corresponding interfaces for VPLS. |
VPLS allows a J-series Services Router to act as a PE router. Besides configuring a VPLS routing instance on a Services Router, you must also configure the interfaces that will carry VPLS traffic between the PE router and CE devices. VPLS traffic to CE devices are supported on the following J-series Services Router interfaces and PIMs:
|
Note: Ports on uPIMs and ePIMs must be in routing mode before you can configure the corresponding interfaces for VPLS. |
 | Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |