[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Static LSPs
Like a static route, a static LSP requires each router along
the path to be configured explicitly. You must manually configure
the path and its associated label values. Static LSPs require less
processing by the LSRs because no signaling protocol is used. However,
because paths are statically configured, they cannot adapt to network
conditions. Topology changes and network outages can create black
holes in the LSP that exist until you manually reconfigure the LSP.
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
