[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Network
Control Protocols
After authentication is completed, the PPP connection is fully
established. At this point, any higher-level protocols (for example,
IP protocols) can initialize and perform their own negotiations and
authentication.
PPP NCPs include support for the following protocols. IPCP and
IPV6CP are the most widely used on J-series devices.
- ATCP—AppleTalk Control Protocol
- BCP—Bridging Control Protocol
- BVCP—Banyan Vines Control Protocol
- DNCP—DECnet Phase IV Control Protocol
- IPCP—IP Control Protocol
- IPV6CP—IPv6 Control Protocol
- IPXCP—Novell IPX Control Protocol
- LECP—LAN Extension Control Protocol
- NBFCP—NetBIOS Frames Control Protocol
- OSINLCP—OSI Network Layer Control Protocol (includes
IS-IS, ES-IS, CLNP, and IDRP)
- SDTP—Serial Data Transport Protocol
- SNACP—Systems Network Architecture (SNA) Control
Protocol
- XNSCP—Xerox Network Systems (XNS) Internet Datagram
Protocol (IDP) Control Protocol
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
