J-Web Configuration

To create a VPLS routing instance:

1. Select Configuration>View and Edit>Edit Configuration.

   The Configuration page appears.

2. Expand Routing instances.
3. Select instance.

   The Instance page appears.

4. Next to Instance, click Add New Entry.
5. In the Instance name box, type green.
6. For Instance type, select vpls.

To configure the VPLS identifer and range for the VPLS routing instance:

1. Next to Protocols, click Configure.
2. For L2vpn or vpls, select vpls.
3. Next to Vpls, click Configure.
4. In the Site range box, enter 10.
5. For Tunnel services choice, select No tunnel services.
6. Next to Site, click Add New Entry. For Site Name, enter R3.
7. For Site identifier mode, select Site identifier. In the Site identifier box, enter 2.
8. Click OK.
9. Click OK to return to the Protocols page.
10. Click OK to return to the Instance page.

To configure the route distinguisher and route target for the VPLS routing instance:

1. Next to Vrf target, click Configure.
2. In the Community box, enter 11111:1. Click OK.

   The Routing Instance page reappears.

3. In the Route distinguisher box, enter 10.255.7.1:1.

To specify the VPLS interface to the CE router:

1. Next to Interface, click Add New Entry.
2. In the Interface name box, enter ge-1/2/1.0.
3. Click OK.

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.