J-Web Configuration

To configure OSPF area 0.0.0.0 on the VPLS PE router:

1. Select Configuration>View and Edit>Edit Configuration.

   The Configuration page appears.

2. Expand Protocols.
3. Select ospf.
4. Next to Area, click Add new entry.
5. In the Area ID, type 0.0.0.0.
6. Click OK.
7. Next to Area select the area 0.0.0.0.
8. Next to Interface, click Add new entry.
9. In the Interface name box, type so-2/0/1.0.
10. Click OK to return to the Area page.
11. Next to Interfaces, click Add new entry.
12. In the Interface name box, type lo0.0.
13. Click OK to return to the Area page.

To configure traffic engineering for OSPF:

1. Click OK to return to the Ospf page.
2. Select Traffic engineering.
3. Click OK.

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.