J-Web Configuration

To configure the BGP internal group on the VPLS PE router:

1. Select Configuration>View and Edit>Edit Configuration. The Configuration page appears.
2. Select Protocols.
3. Next to Bgp, click Configure or Edit.
4. Next to Group, click Add new entry.
5. In the Group name box, type ibgp.
6. In the Local address box, type 10.255.7.168.
7. From the Type list, select internal.
8. Next to Neighbor, click Add new entry.
9. In the Address box, type 10.255.7.164.
10. Click OK.

To configure the BGP family L2vpn and specify NLRI signaling:

1. In the Group page, under Family, select Configure next to L2vpn.
2. Select Signaling.
3. Click OK to return to the Family page.
4. Click OK to return to the Group page.

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.