[Contents] [Prev] [Next] [Index] [Report an Error]

J-Web Configuration

To configure the interface to the PE2 router for RSVP:

  1. Select Configuration>View and Edit>Edit Configuration. The Configuration page appears.
  2. Select Protocols.
  3. Next to Rsvp, click Configure or Edit.
  4. Next to Interface, click Add new entry.
  5. In the Interface name box, type so-2/0/1.0.
  6. Click OK.

To configure the loopback interface for RSVP:

  1. In the Rsvp page, click Add new entry next to Interface.
  2. In the Interface name box, type lo0.0.
  3. Click OK.
  4. In the Rsvp page, click OK.
[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.