[Contents] [Prev] [Next] [Index] [Report an Error]

J-Web Configuration

To configure the interface to the PE2 router for MPLS:

  1. Select Configuration>View and Edit>Edit Configuration.

    The Configuration page appears.

  2. Select Protocols.
  3. Next to Mpls, click Configure or Edit.
  4. Next to Interface, click Add new entry.
  5. In the Interface name box, type so-2/0/1.0.
  6. Click OK.

To configure the loopback for MPLS:

  1. In the Mpls page, click Add new entry next to Interface.
  2. In the Interface name box, type lo0.0.
  3. Click OK.

To configure the path to destination 10.255.7.164:

  1. In the Mpls page, click Add new entry next to Label switched path.
  2. In the Path name box, type chelsea-sagar.
  3. In the To box, type 10.255.7.164.
  4. Click OK.
[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.