[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Enabling OSPF
To activate OSPF on a network, you must enable the protocol
on all interfaces within the network on which OSPF traffic is to travel.
To enable OSPF on one or more interfaces, you must configure one or
more interfaces on the Services Router within an OSPF area. Once the
interfaces are configured, OSPF link-state advertisements (LSAs) are
transmitted on all OSPF-enabled interfaces, and the network topology
is shared throughout the network.
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
