[Contents] [Prev] [Next] [Index] [Report an Error]

Displaying CoS Tunnel Configurations

Purpose

Verify the configuration of the CoS tunnel queuing on a Services Router. You can analyze the flow of traffic by displaying the entire configuration. The following output is specific to CoS queuing configuration.

Action

From the CLI on Router A and B, enter the following show commands.

Router B



user@host# show interfaces gr-0/0/0

per-unit-scheduler


unit 0 {
tunnel
source 70.0.0.1;
destination 70.0.0.2;


family inet {
address 10.80.0.1/24;
}


}


}



user@host#show class-of-service interfaces
gr-0/0/0

unit 0 {
scheduler-map SMAP;
shaping-rate 200m;
}

Router A



user@host# show chassis

fpc 0 {


pic 0 {
tunnel-queuing
}


}
[edit]

[Contents] [Prev] [Next] [Index] [Report an Error]