[Contents] [Prev] [Next] [Index] [Report an Error]

Deleting Security Services

Before you enable MPLS, we recommend you delete all configured security services. To delete the configured services in the security hierarchy, complete the following tasks:

  1. Navigate to the top of the configuration hierarchy in either the J-Web or CLI configuration editor.
  2. Perform the tasks described in Table 128.
  3. Go on to Enabling MPLS on the Router.

Caution: Do not commit after deleting the security configurations. A commit without any security configurations leaves the router unreachable through the management port.

Table 128: Deleting Security Services

Task

J-Web Configuration Editor

CLI Configuration Editor

Save your current configuration in the var/tmp/ directory with an appropriate filename with the .cfg extension—for example, curfeb08.cfg.
  1. In the J-Web interface, select Configuration > History.
  2. Next to Current, in the Actions column, click download.
  3. Select save and specify the path to save your current configuration—for example, curfeb08.cfg.
  4. Click OK.

From the [edit] hierarchy level, enter

save /var/tmp/curfeb08.cfg

Remove all configurations in the security level of the configuration hierarchy.
  1. In the J-Web interface, select Configuration>View and Edit>Edit Configuration.
  2. Next to Security, click delete.

From the [edit] hierarchy level, enter

delete security

Remove all global group and inherited configurations.
  1. In the J-Web interface, select Configuration>View and Edit>Edit Configuration.
  2. In the left pane, select groups > global.
  3. Next to Security on the right panel, click delete.
  4. Click OK.

From the [edit] hierarchy level, enter

delete groups global security

[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.