 |
Note: Ports on uPIMs and ePIMs must be in routing mode before you can configure the corresponding interfaces for VPLS. |
On the PE1 router, configure the interface connected to the CE device to include VPLS encapsulation.
VPLS traffic to CE devices are supported on the following Services Router PIMs:
|
Note: Ports on uPIMs and ePIMs must be in routing mode before you can configure the corresponding interfaces for VPLS. |
|
Before You Begin |
|---|
|
For background information, read VPLS on a PE Router Configuration Overview. |
You can use either J-Web or the CLI configuration editor to configure an interface to the CE device for VPLS.
This topic covers:
 | Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |