Configuring Excess Bandwidth Sharing

When using the IOC (40x1GE IOC or 4x10GE IOC) on an SRX-series device, there are circumstances when you should configure excess bandwidth sharing and minimum logical interface shaping. This section details some of the guidelines for configuring excess bandwidth sharing.

• Excess Bandwidth Sharing and Minimum Logical Interface Shaping
• Selecting Excess Bandwidth Sharing Proportional Rates
• Mapping Calculated Weights to Hardware Weights
• Allocating Weight with Only Shaping Rates or Unshaped Logical Interfaces
• Sharing Bandwidth Among Logical Interfaces

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.