Configuring an ISDN Interface for Bandwidth on Demand

Navigate to the Interfaces level in the configuration hierarchy, and select an ISDN BRI physical interface—for example, br-1/0/3.

For ISDN PRI, select a channelized T1/E1/ISDN PRI interface—for example, ct1-1/0/1.

1. In the J-Web interface, select Configuration>View and Edit>Edit Configuration.
2. Next to Interfaces, click Edit.
3. Under Interface name:
   • For ISDN BRI, click br-1/0/3.
   • For ISDN PRI, click ct1-1/0/1.

From the [edit] hierarchy level:

• For ISDN BRI, enter

  edit interfaces br-1/0/3

• For ISDN PRI, enter

  edit interfaces ct1-1/0/1

Because each ISDN interface must have the same pool identifier to participate in bandwidth on demand, use the dialer pool name bw-pool, the dialer interface configured in Table 61, to configure the ISDN interfaces participating in the pool.

For ISDN BRI, you can group up to four ISDN interfaces together when configuring bandwidth on demand, for a total of eight B-channels (two channels per interface) providing connectivity.

For ISDN PRI, the pool limit is eight B-channels per channelized T1/E1/ISDN PRI port.

1. Next to Dialer options, click Dialer options.
2. Next to Pool, click Add new entry.
3. In the Pool identifier box, type the name of the dialer pool—for example, bw-pool.
4. Click OK.

Enter

set dialer-options pool bw-pool