[Contents] [Prev] [Next] [Index] [Report an Error]

CLI Configuration

To configure the loopback interface on the VPLS PE router:

user@host# set interfaces lo0 unit 0 family inet address 127.0.0.1/32
user@host# set interfaces lo0 unit 0 family inet address 10.255.7.168/32 primary
user@host# set interfaces lo0 unit 0 family iso address 47.0005.80ff.f800.0000.0108.001.0102.5500.7168.00
user@host# set interfaces lo0 unit 0 family inet6 address abcd::10:255:7:168/128 primary

To configure the interface to the PE2 router on the VPLS PE router:

user@host# set interfaces so-2/0/1 unit 0 family inet address 10.1.1.1/30
user@host# set interfaces so-2/0/1 unit 0 family mpls
[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.