[Contents] [Prev] [Next] [Index] [Report an Error]

Before You Begin

Before you configure network interfaces, you need to perform the following tasks:

Install your Juniper Networks device. For more information, see the Hardware Guide for your device.
Establish basic connectivity. For more information, see the Getting Started Guide for your device.
If you do not already have a basic understanding of physical and logical interfaces and Juniper Networks interface conventions, read Interfaces Overview.

Although it is not a requirement, you might also want to plan how you are going to use the various network interfaces before you start configuring them. You can see a list of the physical interfaces installed on the device by displaying the Quick Configuration page, as shown in Figure 12.

[Contents] [Prev] [Next] [Index] [Report an Error]