traceoptions

Syntax

Hierarchy Level

Release Information

Statement introduced in Release 9.4 of JUNOS software.

Description

Define Unified Access Control (UAC) tracing options.

Use this statement when you are configuring the SRX-series device to act as a JUNOS Enforcer in a Unified Access Control (UAC) deployment. When deployed as a JUNOS Enforcer, the SRX-series device enforces the policies that are defined on the UAC’s Infranet Controller.

This statement is supported on SRX-series devices.

Options

flag—Trace operation to perform. To specify more than one trace option, include multiple flag statements.

• all—Trace with all flags enabled
• config—Trace configuration information for all UAC-related configurations. This includes all configuration controlled through the unified-access-control statements at the edit services hierarchy level. It also includes other standard JUNOS configurations required for UAC enforcement such as zones, policies, and interfaces.
• connect—Trace communications between the JUNOS Enforcer and the Infranet Controller, including SSL handshakes and timeouts.
• ipc—Trace inter-process communications. Use this option to trace communications between the Routing Engine (RE) and the UACD enforcement plugin inside the Packet Forwarding Engine (PFE).

Usage Guidelines

For configuration instructions and examples, see the JUNOS Software Security Configuration Guide.

Required Privilege Level

services—To view this statement in the configuration.

services-control—To add this statement to the configuration.

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.