[Contents] [Prev] [Next] [Index] [Report an Error]

show security nat static rule

Syntax

show security nat static rule
<rule-name>
all

Release Information

Command introduced in Release 9.3 of JUNOS software.

Description

Display information about the specified static Network Address Translation (NAT) rule.

This command is supported on SRX-series devices.

Options

rule-name —Name of the rule.

all—Display information about all the static NAT rules.

Required Privilege Level

view

Related Topics

rule (Static NAT)

List of Sample Output

show security nat static rule rsr11
show security nat static rule all

Output Fields

Table 82 lists the output fields for the show security nat static rule command. Output fields are listed in the approximate order in which they appear.

Table 82: show security nat static rule Output Fields

Field Name

Field Description

Static nat rule

Name of the static NAT rule.

Rule-set

Name of the rule-set. Currently, you can configure 8 rules within the same rule-set.

Rule-Id

Rule ID number.

Rule-position

Position of the rules indicates the order that they apply to traffic.

From interface

Name of the interface from which the packet comes.

From routing instance

Name of the routing instance from which the packet comes.

Destination address

Name of the destination addresses that match the rule.

Host addresses

Name of the host addresses that match the rule.

Netmask

Subnet IP address.

Translation hits

Number of times a translation in the translation table is used for a static NAT rule.

Sample Output

show security nat static rule rsr11

user@host> show security nat static rule rsr11 
Static NAT rule: rsr11             Rule-set: rsr1 
  Rule-Id                    : 1  
  Rule position              : 4
  From routing instance      : default
  Destination addresses      : 40.0.0.0
  Host addresses             : 31.0.0.0
  Netmask                    : 255.255.255.0
  Translation hits           : 0

Sample Output

show security nat static rule all

user@host> show security nat static rule all 
Static NAT rule: rsr3              Rule-set: rsr2 
  Rule-Id                    : 3  
  Rule position              : 6
  From interface             : ge-0/0/1.0
  Destination addresses      : 60.0.0.0
  Host addresses             : 100.0.0.0
  Netmask                    : 255.255.255.0
  Translation hits           : 0
Static NAT rule: rsr11             Rule-set: rsr1 
  Rule-Id                    : 1  
  Rule position              : 4
  From routing instance      : default
  Destination addresses      : 40.0.0.0
  Host addresses             : 31.0.0.0
  Netmask                    : 255.255.255.0
  Translation hits           : 0
[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.