[Contents] [Prev] [Next] [Index] [Report an Error]

show security idp application-identification application-system-cache

Syntax

show security idp application-identification application-system-cache

Release Information

Command introduced in Release 9.2 of JUNOS software.

Description

Display application ID from default port/protocol binding or from the application system cache.

This command is supported on SRX-series devices.

Required Privilege Level

view

Related Topics

application-system-cache

clear security idp application-identification application-system-cache

List of Sample Output

show security idp application-identification application-system-cache

Output Fields

Table 51 lists the output fields for the show security idp application-identification application-system-cache command. Output fields are listed in the approximate order in which they appear.

Table 51: show security idp application-identification application-system-cache Output Fields

Field Name

Field Description

Vsys-ID

Application identification number.

IP address

IPv4 address.

Port

Port number that are is use with the current session.

Protocol

Name of the protocol session.

Expired

Session expired status Yes or No

Service

Name of the service.

Sample Output

show security idp application-identification application-system-cache

user@host> show security idp application-identification application-system-cache 
IDP Application System Cache statistics:
Vsys-ID     IP address        Port     Protocol  Expired  Service
  0           5.0.0.1           80       tcp       No         HTTP
[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.