[Contents] [Prev] [Next] [Index] [Report an Error]

request wan-acceleration login

Syntax

request wan-acceleration login fpc slot-number

Release Information

Command introduced in Release 8.5 of JUNOS software.

Description

Log in to the WXC Integrated Services Module (ISM 200) from J-series devices running JUNOS software to access the WXOS CLI.

To view the slot number, enter the show chassis fpc pic-status command. You require interface permission for read-only access, and interface-control and configure permission for read-write access.

This command is supported on J-series devices.

Options

fpc slot-number —Higher number of the two slots in the device chassis occupied by the WXC ISM 200.

Required Privilege Level

maintenance

Related Topics

show chassis fpc

restart wan-acceleration

show wan-acceleration status

List of Sample Output

request wan-acceleration login fpc 3 (permissions set)
request wan-acceleration login fpc 3 (permissions not set)

Output Fields

When you enter this command, you are provided feedback on the status of your request.

Sample Output

This user has a user account with interface-control and configure permissions set for read-write access to WXOS or has interface permissions set for read-only access.

request wan-acceleration login fpc 3 (permissions set)

user@host> request wan-acceleration login fpc 3 
Copyright 2001-2006 Juniper Networks, Inc. All Rights Reserved.

Sample Output

This user has a user account without the correct permissions set and does not gain access to WXOS.

request wan-acceleration login fpc 3 (permissions not set)

user@host> request wan-acceleration login fpc 3 
FPCLOGIN_LOGIN_FAILURE: fpclogin failed: user permissions not set.
[Contents] [Prev] [Next] [Index] [Report an Error]

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.