protocols

See the following sections:

protocols (Interface Host-Inbound Traffic)



protocols {
           
             protocol-name           ;
           
             protocol-name            <except>;
}



[edit security zones security-zone            zone-name          interfaces            interface-name          host-inbound-traffic]

Statement introduced in Release 8.5 of JUNOS software.

Specify the types of routing protocol traffic that can reach the device on a per-interface basis.

This statement is supported on J-series and SRX-series devices.

protocol-name —Protocol for which traffic is allowed. The following protocols are supported:
except—(Optional) except can only be used if all has been defined.

For configuration instructions and examples, see the JUNOS Software Security Configuration Guide.

security—To view this statement in the configuration.

security-control—To add this statement to the configuration.



protocols {
           
             protocol-name           ;
           
             protocol-name            <except>;
}



[edit security zones security-zone            zone-name          host-inbound-traffic]

Statement introduced in Release 8.5 of JUNOS software.

Specify the types of traffic that can reach the device for all interfaces in a zone.

This statement is supported on J-series and SRX-series devices.

protocol-name —Protocol for which traffic is allowed. The following protocols are supported:
except—(Optional) except can only be used if all has been defined.

For configuration instructions and examples, see the JUNOS Software Security Configuration Guide.

security—To view this statement in the configuration.

security-control—To add this statement to the configuration.