See the following sections:
- gateway
gateway-name {
- address [( ip-address | hostname )] |
-
- dead-peer-detection {
- always-send;
- interval seconds ;
- threshold number ;
- }
-
- dynamic {
- connections-limit number ;
-
-
distinguished-name {
-
container container-string ;
-
wildcard wildcard-string ;
- }
-
hostname domain-name ;
-
ike-user-type (group-ike-id | shared-ike-id);
-
inet ip-address ;
-
user-at-hostname user-at-hostname ;
- }
- external-interface external-interface-name ;
- ike-policy name ;
- local-identity (hostname hostname | inet ipv4-ip-address |
- user-at-hostname e-mail-address |
distinguished-name string );
- nat-keepalive seconds ;
- no-nat-traversal;
-
- xauth {
- access-profile profile-name ;
- }
- }
- [edit security ike]
Statement introduced in Release 8.5 of JUNOS software.
Configure an IKE gateway.
This statement is supported on J-series and SRX-series devices.
gateway-name —Name of the gateway.
The remaining statements are explained separately.
For configuration instructions and examples, see the JUNOS Software Security Configuration Guide.
security—To view this statement in the configuration.
security-control—To add this statement to the configuration.
- gateway
gateway-name ;
- [edit security ipsec vpn vpn-name ike]
Statement introduced in Release 8.5 of JUNOS software.
Specify the remote gateway.
This statement is supported on J-series and SRX-series devices.
gateway-name —Name of the gateway.
For configuration instructions and examples, see the JUNOS Software Security Configuration Guide.
security—To view this statement in the configuration.
security-control—To add this statement to the configuration.
- gateway
ip-address ;
- [edit security ipsec vpn vpn-name manual]
Statement introduced in Release 8.5 of JUNOS software.
For a manual security association, specify the IP address of the peer.
This statement is supported on J-series and SRX-series devices.
ip-address —IP address of the peer.
For configuration instructions and examples, see the JUNOS Software Security Configuration Guide.
security—To view this statement in the configuration.
security-control—To add this statement to the configuration.