 | Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
See the following sections:
- application-services (uac-policy);
- [edit security policies
from-zone zone-name to-zone zone-name policy policy-name then permit]
Statement modified in Release 9.4 of JUNOS software.
Enable Unified Access Control (UAC) for the security policy. This statement is required when you are configuring the SRX-series device to act as a JUNOS Enforcer in a UAC deployment. When deployed as a JUNOS Enforcer, the SRX-series device enforces the policies that are defined on the UAC’s Infranet Controller.
This statement is supported on SRX-series devices.
For configuration instructions and examples, see the JUNOS Software Security Configuration Guide.
security—To view this statement in the configuration.
security-control—To add this statement to the configuration.
- application-services (wx-redirect
| wx-reverse-redirect);
- [edit security policies
from-zone zone-name to-zone zone-name policy policy-name then permit]
Statement introduced in Release 8.5 of JUNOS software.
Define the acceleration zone security policy for WX redirection of packets to the WXC Integrated Service Module (ISM 200) for WAN acceleration. During the redirection process, the direction of the WX packet and its type determine further processing of the packet.
This statement is supported on J-series and SRX-series devices.
wx-redirect—Specify the WX redirection needed for the packets that arrive from the LAN.
wx-reverse-redirect—Specify the WX redirection needed for the reverse flow of the packets that arrive from the WAN.
For configuration instructions and examples, see the JUNOS Software Security Configuration Guide.
security—To view this statement in the configuration.
security-control—To add this statement to the configuration.
| Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |