[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
Installing Software
Upgrades by Uploading Files
You can use the J-Web interface to install software packages uploaded
from your computer. Before installing the software upgrade, you need
to verify that there is enough available space on the compact flash.
 |
Note:
This procedure applies only to upgrading one JUNOS software
(legacy services) release to another or upgrading one JUNOS software
release to another. To upgrade JUNOS software (legacy services) to
JUNOS software, see the JUNOS Software Migration Guide.
|
Figure 18 shows the Upload Package page for
the device.
Figure 18: Upload Package Page
To install software upgrades by uploading files:
- Before installing the software upgrade, verify
the available space on the compact flash. For information about verifying
available compact flash space, see the JUNOS Software Release Notes.
- Download the software package as described in Downloading Software Upgrades from Juniper Networks.
- In the J-Web interface, select Manage>Software>Upload
Package.
- On the Upload Package page, enter information into
the fields described in Table 175.
- Click Upload Package. The
software is activated after the device has rebooted.
Table 175: Upload Package Summary
|
Field
|
Function
|
Your Action
|
|
File to Upload (required)
|
Specifies the location of the software package on the local
system.
|
Type the location of the software package, or click Browse to navigate to the location.
|
|
Reboot If Required
|
If this box is checked the device is automatically rebooted
when the upgrade is complete.
|
Select the check box if you want the device to reboot
automatically when the upgrade is complete.
|
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
