[Contents] [Prev] [Next] [Index] [Report an Error]

Objectives

This guide contains instructions for installing and completing the initial configuration of a WXC Integrated Services Module (also known as WXC ISM 200) in a J-series Services Router running JUNOS software.

Note: This manual documents Release 9.4 of JUNOS software. For additional information—either corrections to or information that might have been omitted from this manual—see the JUNOS Software Release Notes at http://www.juniper.net.

Router operations are controlled by JUNOS software. You direct the software through either a Web browser or a command-line interface (CLI) to perform the tasks shown in Table 1.

You use the JUNOS CLI or the J-Web interface to perform the initial configuration of the WXC Integrated Services Module.

For an annotated list of documentation, see List of Technical Publications. All documents are available at http://www.juniper.net/techpubs/.

Table 1: Capabilities of J-series User Interfaces

User Interface	WXC Integrated Services Module Tasks
J-Web graphical browser interface	Initial configuration. Launching the WXOS Web interface. Select Configuration>Quick Configuration>WAN Acceleration>Manage.
JUNOS CLI	Initial configuration. Basic monitoring.
WXOS Web interface	Configuring WAN acceleration features. The WXOS Web interface is part of the J-Web interface, launched in a separate browser window for configuring WAN acceleration.
WXOS CLI	Configuring advanced settings unavailable in the Web interface.

[Contents] [Prev] [Next] [Index] [Report an Error]