Installing J4350 or J6350 Services Routers

To install a J4350 or J6350 Services Router in a rack:

Make sure the rack is properly secured to the building in its permanent location.
Attach a screw to each rack rail in the third hole down from where you want the top of the router to be positioned, as shown in Figure 5. Screw only part way in, leaving about 1/4 in. (6 mm) distance between the screw head and the rail.
Lift the router and insert the elliptical openings in the mounting brackets onto the partially inserted screws so that the router is hanging from the two screws.
Figure 5: Hanging the Router in the Rack
Install at least two mounting screws into each mounting bracket, in addition to the center screws from which the router hangs.