Installing J2320 and J2350 Services Routers

To install the J2320 and J2350 router into a rack:

Have one person grasp the sides of the router, lift the router, and position it in the rack.
Align the top hole in each mounting bracket with a hole in each rack rail as shown in Figure 3 and Figure 4, making sure the chassis is level.
Figure 3: Hanging a J2320 Router in a Rack

Figure 4: Hanging a J2350 Router in a Rack
Have a second person install a mounting screw into each of the two aligned holes. With a number 2 Phillips screwdriver, tighten the screws.
Verify that the mounting screw on one side of the rack is aligned with the mounting screw on the opposite side and that the router is level.
Install the second screw in each mounting bracket.