J-series Services Routers Hardware Guide
DVD Home
Techpubs Home
Report an Error
Collapse TOC
Index
Entire manual as PDF
-
About This Guide
-
-
Objectives
-
Audience
-
Supported Routing Platforms
-
Document Conventions
-
-
List of Technical Publications
-
Documentation Feedback
-
Requesting
Technical Support
-
Overview of Services Routers
-
-
J2320 Services Router Overview
-
J2350 Services Router Overview
-
J4350 Services Router Overview
-
J6350 Services Router Overview
-
J-series Services Router Hardware Features
-
-
J2320 and J2350 Services Router Hardware Features
-
-
J2320 and J2350 Chassis
-
J2320 and J2350 Midplane
-
J2320 and J2350 Routing Engine Hardware
-
J2320 and J2350 Boot Devices
-
J2320 and J2350 Front Panel
-
-
Physical Interface
Modules (PIMs)
-
Power Button and POWER
LED
-
STATUS
LED
-
ALARM
LED
-
HA LED
-
RESET CONFIG
Button
-
Built-In
Gigabit Ethernet Ports
-
Console Port
-
AUX Port
-
USB
Port
-
J2320 and J2350 External Compact Flashes
-
J2320 Power System
-
J2350 Power System
-
J2320 and J2350 Cooling System
-
J4350 and J6350 Services Router Hardware Features
-
-
J4350 and J6350 Chassis
-
J4350 and J6350 Midplane
-
J4350 and J6350 Routing Engine Hardware
-
J4350 and J6350 Boot Devices
-
J4350 and J6350 Front Panel
-
-
Physical Interface Modules
(PIMs)
-
Power Button and POWER
LED
-
STATUS LED
-
ALARM LED
-
HA LED
-
RESET CONFIG Button
-
Built-In
Gigabit Ethernet Ports
-
Console Port
-
AUX Port
-
USB Port
-
J4350 Power System
-
J6350 Power System
-
J4350 and J6350 Cooling System
-
PIM Overview
-
-
PIM Terms
-
Field-Replaceable PIMs
-
-
J2320 and J2350 Field-Replaceable PIM and Module Summary
-
J4350 and J6350 Field-Replaceable PIM Summary
-
1-Port, 6-Port, 8-Port, and 16-Port Gigabit Ethernet
uPIMs
-
1-Port Gigabit Ethernet ePIMs
-
Dual-Port Serial PIM
-
Dual-Port T1 or E1 PIM
-
Dual-Port Channelized T1/E1/ISDN PRI PIM
-
T3 or E3 PIM
-
Dual-Port Fast Ethernet PIM
-
4-Port Fast Ethernet ePIM
-
4-Port ISDN BRI PIMs
-
ADSL PIM
-
G.SHDSL PIM
-
Preparing for Router Installation
-
-
General Site Guidelines
-
Rack Requirements
-
-
Rack Size and Strength for J2320 and J2350 Routers
-
Rack Size and Strength for J4350 and J6350 Routers
-
Connection to Building Structure
-
Router Environmental Tolerances
-
Fire Safety Requirements
-
-
Fire Suppression
-
Fire Suppression Equipment
-
Power Guidelines, Requirements, and Specifications
-
-
Site Electrical Wiring Guidelines
-
-
Signaling Limitations
-
Radio Frequency Interference
-
Electromagnetic Compatibility
-
Router Power Requirements
-
AC Power, Connection, and Power Cord Specifications
-
DC Power, Connection, and Power Cable Specifications
-
Planning for Power Management
-
Network Cable Specifications
-
ISDN Provisioning
-
Site Preparation Checklist
-
Installing and Connecting a Services Router
-
-
Before You Begin
-
Unpacking a J-series Services Router
-
Installing J2320 and J2350 Routers
-
Installing J4350 and J6350 Routers
-
Connecting Interface Cables to Services Routers
-
Chassis Grounding
-
Connecting Power
-
-
Connecting AC Power
-
Connecting DC Power
-
Powering a Services Router On and Off
-
Establishing Basic Connectivity
-
-
Basic Connectivity Terms
-
Basic Connectivity Overview
-
-
Router Identification
-
Root Password
-
Time Zone and System Time
-
Network Settings
-
Default Gateway
-
Backup Router
-
Loopback Address
-
Built-In Ethernet Interface Address
-
Management Access
-
Before You Begin
-
Connecting to a Services Router
-
-
Connecting to the J-Web Interface
-
Connecting to the CLI Locally
-
Connecting to the CLI Remotely
-
-
Configuring
the Modem at the Router End
-
Connecting the Modem to the Console Port
-
Connecting to the CLI at the User End
-
Configuring Basic Settings with J-Web Quick Configuration
-
Configuring Basic Settings Using the CLI Configuration Wizard
-
-
About the CLI Configuration Wizard
-
Using the JUNOS Software Configuration Wizard
-
Configuring Basic Settings with a Configuration Editor
-
Verifying Basic Connectivity and the Configuration
-
-
Displaying Basic Connectivity Configurations
-
Installing JUNOS Software
-
Replacing Hardware Components
-
-
Tools and Parts Required
-
Replacing the Console Port Cable
-
Replacing a PIM
-
-
Removing a PIM
-
Installing a PIM
-
Replacing PIM Cables
-
-
Removing PIM Cables
-
Installing PIM Cables
-
Removing and Replacing the Chassis Cover on J2320 and J2350
Routers
-
Replacing Internal Compact Flashes on J2320 and J2350 Routers
-
Replacing Internal Compact Flashes on J4350 and J6350 Routers
-
Replacing External Compact Flashes
-
Replacing USB Storage Devices
-
-
Removing the USB Storage Device
-
Installing the USB Storage Device
-
Replacing DRAM Modules
-
-
Removing a DRAM Module
-
Installing a DRAM Module
-
Replacing Power System Components
-
-
Replacing AC Power Supply Cords
-
Removing an AC Power Supply from J6350 Routers
-
Installing an AC Power Supply in J6350 Routers
-
Replacing DC Power Supply Cables
-
Removing a DC Power Supply
-
Installing a DC Power Supply
-
Replacing Crypto Accelerator Modules on J2320 and J2350 Routers
-
-
Removing a J2320 or J2350 Crypto Accelerator Module
-
Installing a J2320 or J2350 Crypto Accelerator Module
-
Replacing Crypto Accelerator Modules on J4350 and J6350 Routers
-
-
Removing a J4350 or J6350 Crypto Accelerator Module
-
Installing a J4350 or J6350 Crypto Accelerator Module
-
Replacing Air Filters on J2350 Routers
-
Replacing Air Filters on J4350 and J6350 Routers
-
Troubleshooting a Services Router
-
-
Troubleshooting Hardware Components
-
-
Monitoring and Correcting Chassis Alarm Conditions
-
Troubleshooting Power Management
-
Resetting the Configuration File When the Router Is Inaccessible
-
-
Using the RESET CONFIG Button
-
Changing the RESET CONFIG Button Behavior
-
Recovering the Root Password
-
Recovering Primary Boot Devices
-
-
Why Compact Flash Recovery Might Be Necessary
-
Recommended Recovery Hardware and Software
-
Configuring Internal Compact Flash Recovery
-
Contacting the Juniper Networks Technical Assistance Center
-
Contacting Customer Support and Returning Hardware
-
-
Locating Component Serial Numbers
-
-
J2320 and J2350 Chassis Serial Number and Agency Labels
-
J4350 and J6350 Chassis Serial Number and Agency Labels
-
PIM Serial Number Label
-
Power Supply Serial Number Labels
-
Contacting Customer Support
-
-
Information You Might Need to Supply to JTAC
-
Return Procedure
-
Packing a Router or Component for Shipment
-
-
Tools and Parts Required
-
Packing the Services Router for Shipment
-
Packing Components for Shipment
-
Network Cable Specifications and Connector Pinouts
-
-
Serial PIM Cable Specifications
-
-
RS-232 DTE Cable Pinout
-
RS-232 DCE Cable Pinout
-
RS-422/449 (EIA-449) DTE Cable Pinout
-
RS-422/449 (EIA-449) DCE Cable Pinout
-
EIA-530A DTE Cable Pinout
-
EIA-530A DCE Cable Pinout
-
V.35 DTE Cable Pinout
-
V.35 DCE Cable Pinout
-
X.21 DTE Cable Pinout
-
X.21 DCE Cable Pinout
-
Fast Ethernet RJ-45 Connector Pinout
-
Gigabit Ethernet uPIM RJ-45 Connector Pinout
-
Gigabit Ethernet ePIM RJ-45 Connector Pinout
-
Chassis Console Port Pinouts
-
E1 and T1 RJ-48 Cable Pinouts
-
E3 and T3 BNC Connector Pinout
-
ADSL and G.SHDSL RJ-11 Connector Pinout
-
ISDN RJ-45 Connector Pinout
-
Safety and Regulatory Compliance Information
-
-
Definition of Safety Warning Levels
-
Safety Guidelines and Warnings
-
-
General Safety Guidelines and Warnings
-
-
Qualified Personnel
Warning
-
Preventing Electrostatic
Discharge Damage
-
Electrical Safety Guidelines and Warnings
-
-
General Electrical
Safety Guidelines
-
AC Power Electrical Safety Guidelines
-
-
Power Cable Warning (Japanese)
-
DC Power Electrical
Safety Guidelines
-
Power Sources for Redundant Power Supplies
-
DC Power Disconnection
Warning
-
DC Power
Grounding Requirements and Warning
-
DC Power Wiring Sequence Warning
-
DC Power Wiring Terminations Warning
-
Grounded Equipment Warning
-
Warning Statement for Norway and Sweden
-
In Case
of Electrical Accident
-
Multiple Power Supplies Disconnection Warning
-
Power
Disconnection Warning
-
TN Power Warning
-
Telecommunication Line Cord Warning
-
Installation Safety Guidelines and Warnings
-
-
Chassis Lifting Guidelines
-
Installation Instructions Warning
-
Rack-Mounting Requirements
and Warnings
-
Ramp Warning
-
Laser and LED Safety Guidelines and Warnings
-
-
General Laser Safety Guidelines
-
Class 1
Laser Product Warning
-
Class 1 LED Product
Warning
-
Laser Beam Warning
-
Radiation from
Open Port Apertures Warning
-
Maintenance and Operational Safety Guidelines and Warnings
-
-
Battery Handling Warning
-
Jewelry Removal
Warning
-
Lightning
Activity Warning
-
Operating
Temperature Warning
-
Product Disposal
Warning
-
Agency Approvals
-
Compliance Statements for Environmental Requirements
-
-
Lithium Battery
-
Compliance Statements for EMC Requirements
-
-
Canada
-
European Community
-
Japan
-
United States
-
-
FCC Part 15 Statement
-
FCC Part 68 Statement
-
Index
-
-
Index