Field-Replaceable PIMs

PIMs are removable and insertable only when the Services Router is powered off. You install PIMs into slots in the router chassis. If a slot is not occupied by a PIM, a PIM blank panel must be installed to shield the empty slot and to allow cooling air to circulate properly through the router.

This section contains the following topics:

• J2320 and J2350 Field-Replaceable PIM and Module Summary
• J4350 and J6350 Field-Replaceable PIM Summary
• 1-Port, 6-Port, 8-Port, and 16-Port Gigabit Ethernet uPIMs
• 1-Port Gigabit Ethernet ePIMs
• Dual-Port Serial PIM
• Dual-Port T1 or E1 PIM
• Dual-Port Channelized T1/E1/ISDN PRI PIM
• T3 or E3 PIM
• Dual-Port Fast Ethernet PIM
• 4-Port Fast Ethernet ePIM
• 4-Port ISDN BRI PIMs
• ADSL PIM
• G.SHDSL PIM

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.