VPLS Options for BGP and LDP Signaling

This section describes the following options that are available with both BGP and LDP signaling:

• Option: Configuring VPLS to Use LSI Interfaces
• Option: Configuring Tunnel Services on MX-series Routers
• Optional: Configuring Integrated Routing and Bridging in a VPLS Instance (MX-series Routers Only)
• Optional: Configuring VLAN IDs in a VPLS Instance (MX-series Routers Only)
• Option: Applying VPLS Policers and Filters
• Option: Enabling VPLS Class of Service
• Option: Enabling VPLS Graceful Restart
• Option: Clearing MAC Addresses and Modifying the VPLS Table Timeout Interval
• Option: Configuring VPLS Interinstance Bridging and Routing
• Option: Selecting Interfaces to Process VPLS Traffic
• Option: Limiting the Number of MAC Addresses Learned on an Interface
• Option: Optimizing VPLS Traffic Flows
• Option: Aggregated Interfaces for VPLS
• Option: Configuring VPLS Graceful Routing Engine Switchover
• Option: Configuring VPLS Nonstop Active Routing
• Option: Configuring the Spanning Tree Protocol and VPLS on MX-series Routers
• Filtering Layer 2 Packets in a VPLS Instance (MX-series Routers Only)

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.